User:Scellef/Laptop POST Troubleshooting Checklist

There are four main symptoms for a laptop that isn't properly powering on:

1. The system isn't getting enough power
2. The system could be failing its POST
3. The LCD panel could be dead
4. The graphics card could be fried

The first thing to try and determine is where the issue lies so that we can isolate the cause. In order to do this, we need to systematically work through the above list and strike out the possibilities.

1. The system isn't getting enough power

You should follow these steps if the following conditions are true:

• You can't get into BIOS
• The screen remains dark
• None of the indicator lights turn on

Steps

1. Remove the Primary Battery from the laptop.
2. Confirm the Power Rating for the laptop, and find an appropriate adapter.
   • Frequently, laptops require higher amperage adapters than what they're rated for. Manufacturers often have 65W and 90W adapters, sometimes even 120W adapters or higher, that are interchangeable with their various models. Generally, the important thing is to find an adapter with a barrel that will fit into the laptop. Consult an Instructor for assistance in finding an adapter for the system you're working on.
3. Check to see if any indicator lights turn on after connecting the adapter. If the lights remain dark, try using a couple of higher wattage adapters.
   • If you still aren't seeing any indicator lights after this step, then this system is dead. Consult your instructor to see whether it should be Recycled or made into a Parts Machine.
   • If the indicator lights come on, but it's still now showing video or POSTing, proceed to the next section.

2. The system could be failing its POST

You should follow these steps if the following conditions are true:

• You can't get into BIOS
• The screen remains dark
• The indicator lights turn on and/or the fans and drives spin up

Here, we'll be looking to see whether the system is successfully POSTing, but unable to produce video output. There's a great deal of variance that arises across different manufacturers, so there is some blind inference that is required in this step.

Steps

1. Connect the system to AC power, and power it on.
2. Put your hand over where the hard drive or optical drive are located and try to feel whether it's spinning up.
   • If you can confirm the drives are spinning up after powering on, this is indicative that the machine is successfully POSTing, but not providing video. Move on to the next section.
   • If the drives are not spinning up, or if you notice the Capslk, Nmlk, or ScrLk indicator lights blinking intermittenly, then the system is failing its POST. Proceed to the next step
3. Remove any PCMCIA and Mini-PCI (typically just Wireless cards) cards you can find.
4. Remove the RAM currently in the system and set it aside, making note of its speed and type.
5. Grab between 4 to 6 sticks of RAM of the same speed and type from the RAM shelf.