Difference between revisions of "A Mac Rebuild Table"
Jump to navigation
Jump to search
(acceptable battery range) |
|||
| Line 1: | Line 1: | ||
| + | {{delete}} this is an outdated and irrelevent checklist. | ||
| + | |||
{| border="1" | {| border="1" | ||
|- | |- | ||
Revision as of 13:43, 19 August 2009
 This page has been requested to be deleted. |
this is an outdated and irrelevent checklist.
| Steps | Notes | Done |
| Check capacitors | ||
| Clean/dust inside | ||
| Replace ram and hard drive | 13GB min HD; 2x128MB PC-100 SDRAM | |
| For tower, verify video card present | must be ATI, ATI Radeon, or nVidia | |
| For tower, remove extra PCI cards | ||
| Test/replace battery | 3.5v-3.7v is good; this requires clock set later | |
| For tower, cover open slots | ||
| Attach keyboard and mouse | ||
| Power on | boot Finnix or Mac OS X | |
| Record configuration | CPU, Mem, HD, CD, Video, extras | |
| Set HW clock date/time to UTC | may not be necessary if connected to network | |
| Install Ubuntu from CD | This may be removed if using pre-installed disk | |
| Activate network interface | Set to DHCP | |
| Update installed software | System Update Manager | |
| Install gnome-ppp and ogle-gui, if necessary | modem: gnome-ppp; dvd: ogle-gui | |
| Test CD/DVD data and sound | CD-RW test? | |
| Test/detect modem, if present | ||
| For tower with Zip drive, test Zip | Format, copy to, read from | |
| Close up the box | check for loose parts and cables | |
| Clean outside cover | case, monitor face (iMac), connector panel, keyboard, mouse |