LVM for dual drive installation

1. configure BIOS for PXE boot

2. choose 10.04 install with no preconfiguration

3. for partitioning options, choose manual

4. set up the following partitions on the first drive (in order)...

  /boot - 300MB - ext4 - primary - at the beginning of the free space
  /     - 15 GB - ext4 - logical - at the beginning of the free space
  /root - 1.5 GB - swap -   n/a  - at the end of the free space
  /home - remaining space (ie. 23 GB for a 40 GB drive)

5. set up the following partition on the second drive...

  /home - use the entire available space (ie. 23 GB for a 40 GB drive)