Difference between revisions of "Labeling and tallysheets for keeper systems"
Jump to navigation
Jump to search
m |
|||
Line 3: | Line 3: | ||
Please fill out the labels as completely as possible. The sections on the label include: | Please fill out the labels as completely as possible. The sections on the label include: | ||
− | + | * ID | |
− | + | ** Write the Gizmo ID number from the receiving label in this field. | |
− | + | * DIMMs | |
− | + | ** Circle the number of DIMM slots on the motherboard. (Double check the number, rather than blindly accepting the note on the label from Evaluation I.) | |
− | + | * Processor Type | |
− | + | ** Circle "No Proc" or the processor type. If it's a standard Intel Pentium III or greater (as opposed to an off brand) circle ">=P-III". | |
− | + | * Proc Speed | |
− | + | ** Write in the processor speed. For speeds less than 1 GHz, "round off" the speed to the nearest number that ends in 00, 33, 50, or 66. | |
− | + | * Socket Type | |
− | + | ** Circle the type of socket that the motherboard has (or "Slot" if it's a slot based motherboard). Also circle "Dual" if there are two identical slots or sockets. | |
− | + | * ISA, PCI, AGP | |
− | + | ** If there are any ISA slots, circle ISA. | |
− | + | ** If there are any PCI slots, circle PCI. | |
− | + | ** If there is a AGP slot, circle AGP. | |
Notes | Notes |
Revision as of 17:06, 9 August 2005
All systems that are being kept need to have correctly marked labels. There are pre-printed labels that should be used when possible. The pre-printed labels allow you to circle most of the relevant data with a minimal need for writing stuff in. If these labels are missing, alert an evaluation coordinator and use a plain white label to clearly record the information.
Please fill out the labels as completely as possible. The sections on the label include:
- ID
- Write the Gizmo ID number from the receiving label in this field.
- DIMMs
- Circle the number of DIMM slots on the motherboard. (Double check the number, rather than blindly accepting the note on the label from Evaluation I.)
- Processor Type
- Circle "No Proc" or the processor type. If it's a standard Intel Pentium III or greater (as opposed to an off brand) circle ">=P-III".
- Proc Speed
- Write in the processor speed. For speeds less than 1 GHz, "round off" the speed to the nearest number that ends in 00, 33, 50, or 66.
- Socket Type
- Circle the type of socket that the motherboard has (or "Slot" if it's a slot based motherboard). Also circle "Dual" if there are two identical slots or sockets.
- ISA, PCI, AGP
- If there are any ISA slots, circle ISA.
- If there are any PCI slots, circle PCI.
- If there is a AGP slot, circle AGP.
Notes
Put the pre-printed label on the front of the system (not on a drive bay cover, since those can pop out.
The information recorded on the label should also be recorded on the tally sheet.