Other
 This page has been requested to be deleted. |
WIRELESS HANDBOOK
(For personal use only) HOME
MASTER RESETS
ONLINE HARD RESET GUIDE - OFFSITE (HAS SOME MODELS BUT NOT ALL)
HTC
Dash / S620 1. PRESS AND HOLD BOTH SOFT KEYS. 2. WHILE HOLDING DOWN SOFT KEYS, PRESS AND RELEASE THE POWER BUTTON, WAIT 3-5 SEC. (PHONE SHOULD POWER ITSELF ON BY DOING THIS) 3. RELEASE THE TWO KEYS SOFT KEYS. 4. WHEN SCREEN ON DASH LOOKS LIKE IT'S IN DOS FORMAT, PRESS SEND (GREEN ANSWER KEY)
G1 Google Android
HARD RESET
1. Turn off the Phone
2. Press HOME + POWER KEYS (keep them holding for about 25 secs)
until you see a screen with a phone and a triangle.
then
3. SLIDE YOUR KEYBOARD TO OPEN IT
4. press ALT + l ( TO SHOW YOU OPTIONS)
5. Press ALT + W ( TO FORMAT ALL DATA)
Note: When I write the sign + you don't have to press the + sign, it means that you need to press both keys @ the same time.
Note2: Don't do this if you don't have a Data Plan or your 2G or 3G is not working, why? because you will not be able to sign in again without a working Data Plan (2g / 3g).
MyTouch 3G
1. Pull the battery if necessary to power down the phone 2. Re-install the battery 3. Hold down the Home and Back keys and press the power button briefly, keeping the Home and Back keys pressed 4. The phone will boot to a white screen with some green text. Below that, you will see CLEARSTORAGE in purple. under that you will see "Delete all user data?" <ACTION> Yes - <POWER> No 5. Choose Yes by clicking the track ball (this is the ACTION. You can also choose not to proceed by pressing the POWER button)
Remember...this is a MASTER RESET, and will set your phone back to the way it left the factory. It will delete everything on the phone.
Shadow
1. Start > Accessories > Clear Storage
VX6950 CDMA Diamond (Sprint/Alltel/Cellular South)
1. Turn phone off
2. Press Power+Down Volume+Enter at the SAME TIME
3. Choose one of the options on the screen. Volume Up resets without erasing data. Volume Down resets and erases all user data.
Most Other PDA Models (Verified on Tilt 8925)
1. Power on the phone.
2. Hold down the right and left soft key and press the reset button with the stylus
3. Press the Send (call) button to confirm reset
4. Press the Send (call) button to complete the reboot.
LG VX9400 or Verizon?
This worked on a VX9400. I don't know if this is just for CDMA LG's or just for Verizon phones but it resets the NAM phone number to Initial Setup Required which also resets the security code to the last 4 numbers of the default phone number. You can then dial *228 to reactivate the phone with your phone number which again resets the security code to the last 4 of your phone number.
1. Enter the service menu by pressing [MENU] [0]. 2. Enter the service code which is all zeros [0000000]. 3. Choose [1] 4. When it asks for MDN and MIN, just enter all zeros. 5. Phone will reset at the end of programming and your done.
LG
CU400 (Master reset - type 277634#*# from the main screen, choose Master Reset)
CU500 (Master reset - type 277634#*# from the main screen, choose Master Reset)
CU720 Shine (Master reset - type 2945#*# from the main screen, choose Factory Reset)
CU920 VU (Master reset - type 277634#*# from the main screen, choose Master Reset)
CT810 Incite (Master Reset - Turn phone off, Hold Down Volume+Camera+PowerButton until phone comes on. Release buttons and phone will reset)
GR500 XENON (Master Reset - Enter engineering mode by pressing 3845#*500#, then choose Master Reset)
GT365 NEON (Master Reset - Enter engineering mode by pressing 1809#*365#, then choose Master Reset)
MOTOROLA CLIQ 1. Press and hold the Camera key down, then tap the On button. 2. Release the Camera key when advised. 3. A black screen appears, with green writing. At this stage press the Down volume key to select Recovery Mode. 4. An icon appears, showing a triangle containing an exclamation mark above a handset. 5. Slide open the keypad then press and hold the ALT key and tap the W key. 6. The handset will restart to complete the reset.
i930
1. Remove your sim card
2. Turn off the cell phone
3. Press and hold the LEFT softkey while powering on the phone.
4. Press OK when instructed to do so and the phone will reset to defaults.
Q9h
(Master reset - Hold down the 'E' and 'Z' buttons while turning the phone on. You will see a MASTER RESET question on the screen. Select 'Yes' to perform a Master Reset)
Q9m
(Master reset - Hold down the center of the 'Directional' button while turning the phone on. You will see a MASTER RESET question on the screen. Select 'Yes' to perform a Master Reset)
K1m (CDMA)
Perform at your own risk!!! This will delete everything (contacts, pics, etc...), not just contacts! Goto opcode screen: Enter: CLR, 0, 4, 8, 2, 6, 3, * (Note: Must be done quickly.) From the opcode screen: Enter 18* and click center radial button on phone. Then enter 0 and click on center radial button. -wait and it will say success after a short time. Enter 18* and click center radial button on phone. Then enter 1 and click on center radial button. -wait and it will say success after a short time. Exit out. Contacts, Pix & Flix, Called #’s, etc should all be deleted… Note: 18* enter, 0 enter – does master reset. 18* enter, 1 enter – does master clear. WARNING: There are other #’s that can be entered…but I think you can really BREAK/BRICK your phone in there quite easily
CDMA Motorola's that are missing the reset option in the menu.
Enter: CLR or Menu, 0, 4, 8, 2, 6, 3, * (Note: Must be done quickly.) From the opcode screen: Enter 18* and click center radial button on phone. Then enter 0 and click on center radial button. -wait and it will say success after a short time. Enter 18* and click center radial button on phone. Then enter 1 and click on center radial button. -wait and it will say success after a short time. Exit out. Contacts, Pix & Flix, Called #’s, etc should all be deleted… Note: 18* enter, 0 enter – does master reset. 18* enter, 1 enter – does master clear. WARNING: There are other #’s that can be entered…but I think you can really BREAK/BRICK your phone in there quite easily
DROID (VERIZON)
You can hard reset your Motorola Droid phone if you want clear all of the data off of the device and start fresh. Here’s how it’s done.
1. Turn the Droid off. If it won’t turn off, take the battery out then place it back in. 2. Open the keyboard and press the X key while pressing and holding Power. The device will power on. Keep holding the buttons down until a yellow triangle appears. 3. Press the Camera and Volume Up buttons at the same time to get to the menu. (I had to press them several times). 4. Use the direction pad to the right of the keyboard to select the Format option.
Palm
Palm Treo 700p/755p 1. Disconnect the Treo from a charger or USB cable. 2. Remove the battery cover and take out the battery. 3. Press and hold Power/End while you insert the battery. 4. After the black bar goes across the screen and the logo appears the second time, release Power/End. 5. Press Up when the Erase all data? prompt appears. 6. Press Up to confirm the hard reset. 7. Go through the steps of setting up the device again by picking a language and calibrating the stylus.
Centro 1. Disconnect the Centro from a charger or USB cable. 2. Remove the battery cover and take out the battery. 3. Press and hold Power/End while you insert the battery. 4. After the black bar goes across the screen and the logo appears the second time, release Power/End. 5. Press Up when the Erase all data? prompt appears. 6. Press Up to confirm the hard reset. 7. Go through the steps of setting up the device again by picking a language and calibrating the stylus.
Pantech
Pantech C3/C300 & Other Pantech Models 1. Remove Sim Card from phone. 2. Type *01763*737381# - master reset (user data, user code) without SIM
Pantech Duo C810
Turn the phone off open the qwerty keyboard and hold S and L while turning the phone on.
IMPORTANT: The device will be set back to factory settings; all data stored on the device will be lost. The device may not be functional for up to 15 minutes after a master reset is performed.
YOU MUST HAVE A SIM CARD IN THE PHONE FOR THIS TO WORK
1. From the standby screen, press Start.
2. Scroll to and select Settings.
3. Scroll to and select Security.
4. Scroll to and select Master Clear.
5. Enter password, press Done.
NOTE: Default password is 0000.
6. To confirm reset, press Yes.
NOTE: The device will automatically reset and may not function for up to 15 minutes following the master reset.
Samsung
Samsung BlackJack i607/i617 1. Remove and replace the battery
2. Press the Circular navigation button up and the End button at the same time while turning the power on.
3. Press 1 to reboot the device and Y to confirm.
NOTE: If your phone says 'this phone can only be used with a specific sim', you can clear this out by turning on the phone without a sim and entering *2767*3855#
Samsung Jack i637
1.With the unit powered off, Press and hold down the number “5” key.
2.With the “5” key depressed, power on the unit. Then, release all keys. The hardware format menu will be displayed.
3.Tap the number “3” key to Master Reset the device.
4.Finally, tap the “y” key to confirm your selection. The unit will reset back to initial settings.
Sidekick
Sidekick 3 1. Remove the battery and the SIM card from the device. 2. Flip the sidekick open; press and hold the letter 'r' on the keypad. 3. While holding the letter 'r', place the battery back in the device. DO NOT INSERT THE SIM CARD YET. 4. The sidekick will restart itself twice. Please make sure not to let the letter 'r' go until it has fully rebooted. 5. Once it has fully rebooted, remove the battery, re-insert the SIM card and battery and power up the device. 6. Once the device has fully rebooted, all prior information should be erased from the device and it should be restored back to the default factoy settings.
Sidekick Slide 1. Turn OFF the device.
2. Remove the SIM card from the device. 3. Hold down the 'R' button and turn on the phone.
4. Keep holding the 'R' button until the phone turns off and then back on twice. 5. Once the device has fully rebooted, all prior information should be erased from the device and it should be restored back to the default factory settings.
UTStarcom
XV6700 Pocket PC - http://dts.vzw.guided.atomz.com/exec/?state=three&p=2200&ld=vzw_xv6700_perform_hard_reset.html
1. While holding the Left and Right soft keys, insert the stylus into the reset hole at the bottom of the phone for 2 seconds.
2. Screen will now display, 'Press Y to restore factory default. Press N to exit'. Press Y on the QWERTY keyboard.