Difference between revisions of "Removing components from systems"
Jump to navigation
Jump to search
m (grammatical) |
(→ORANGE CHART: instruct people to add label) |
||
Line 29: | Line 29: | ||
good_mobo [label="Does the motherboard\nhave DDR slots?"] | good_mobo [label="Does the motherboard\nhave DDR slots?"] | ||
+ | |||
+ | put_on_label [label="Put the label on the front of the system if you haven't already.", | ||
+ | shape="box"] | ||
put_on_cart [label="Put the system on the cart\nwith label facing out", shape="box", style="bold"] | put_on_cart [label="Put the system on the cart\nwith label facing out", shape="box", style="bold"] | ||
Line 45: | Line 48: | ||
what_class -> check_also_pull [label="RED\nLIGHT", color="red", style="bold"] | what_class -> check_also_pull [label="RED\nLIGHT", color="red", style="bold"] | ||
− | check_also_pull -> | + | check_also_pull -> label [color="red", style="bold"] |
what_class -> process_green1 [label="GREEN\nLIGHT", color="green", style="bold"] | what_class -> process_green1 [label="GREEN\nLIGHT", color="green", style="bold"] | ||
− | process_green1 -> process_green2 -> | + | process_green1 -> process_green2 -> put_on_label [color="green", style="bold"] |
what_class -> wantcase [label="YELLOW\nLIGHT"] | what_class -> wantcase [label="YELLOW\nLIGHT"] | ||
Line 59: | Line 62: | ||
process_mobo1 -> process_mobo2 -> process_mobo3 -> process_mobo4 -> process_yellow1 | process_mobo1 -> process_mobo2 -> process_mobo3 -> process_mobo4 -> process_yellow1 | ||
− | process_yellow1 -> put_on_cart | + | process_yellow1 -> put_on_label |
+ | |||
+ | put_on_label -> put_on_cart | ||
} | } |
Revision as of 15:10, 18 September 2010
ORANGE CHART
Notes
Do not pull anything unless these instructions (or the whiteboard) say to pull it. This includes ribbon cables.
- When pulling sound cards, leave sound cables attached to card (not CD Drive or motherboard)
- Do not pull risers. (They are designed to go with the motherboard they came with and are not generic.)
- When pulling any kind of drive, rails and brackets should stay with the system.
- half-height sized cards
- A few PCI or AGP cards will have a back plate that is only half as tall as normal cards. These are "half height" cards and need to be left in the box.
- This refers to the size of the "stem" of the card, not the card itself.
- When pulling cards, leave cables attached to card
- Do not pull risers. (They are designed to go with the case they came with and are not generic.)
- Do not pull a "card" that does not go into an industry standard slot. (We do not consider these to be cards, and they need to stay with their motherboards.)