Difference between revisions of "Configure scanner"
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{delete}} | ||
| + | |||
| + | Scanning is done with the xsane program, which automatically detects the scanner and uses the correct drivers. Not all scanners will work with linux. For a list of scanners and their compatibility with linux, see the Sane Project list of [http://sane.alioth.debian.org/sane-supported-devices.html supported devices]. | ||
| + | |||
| + | == Ubuntu== | ||
| + | Go to Applications> Graphics>XSane Image scanning program. | ||
| + | |||
| + | If your scanner is not found by xsane, you can add the package libsane-extras which will add some unofficial sane backends. Even with that, some scanners will not work. | ||
| + | |||
| + | sudo apt-get install libsane-extras | ||
| + | |||
| + | == FreekBox 3 == | ||
USB | USB | ||
| Line 18: | Line 30: | ||
**apt-get update | **apt-get update | ||
**apt-get install xsane libsane libsane-extras sane sane-utils | **apt-get install xsane libsane libsane-extras sane sane-utils | ||
| + | |||
| + | |||
| + | remember to put yourself in the scanner group (edit /etc/group as root) | ||
| + | |||
to start using the scanner | to start using the scanner | ||
| Line 28: | Line 44: | ||
*Make sure the scanner is supported by [http://sane-project.org sane] | *Make sure the scanner is supported by [http://sane-project.org sane] | ||
*Make sure the lock is disengaged (not all scanners have a lock, but the best ones do) | *Make sure the lock is disengaged (not all scanners have a lock, but the best ones do) | ||
| + | *Let the scanner warm up and try it again | ||
| + | *Unplug the scanner's power and plug it back in and try again | ||
*Check to see if the power supply is good (and the right voltage/amperage) | *Check to see if the power supply is good (and the right voltage/amperage) | ||
**It is generally a good idea to have some "known good" power supplies on hand for initial testing. | **It is generally a good idea to have some "known good" power supplies on hand for initial testing. | ||
Latest revision as of 10:46, 5 August 2010
 This page has been requested to be deleted. |
Scanning is done with the xsane program, which automatically detects the scanner and uses the correct drivers. Not all scanners will work with linux. For a list of scanners and their compatibility with linux, see the Sane Project list of supported devices.
Ubuntu
Go to Applications> Graphics>XSane Image scanning program.
If your scanner is not found by xsane, you can add the package libsane-extras which will add some unofficial sane backends. Even with that, some scanners will not work.
sudo apt-get install libsane-extras
FreekBox 3
USB
Configuring a USB scanner is a matter of installing the sane scanner drivers and a scanning program.
The following list will work:
- xsane
- libsane
- libsane-extras
- sane
- sane-utils
to install them:
- open a terminal
- become root
- type:
- apt-get update
- apt-get install xsane libsane libsane-extras sane sane-utils
remember to put yourself in the scanner group (edit /etc/group as root)
to start using the scanner
- connect the power to the scanner
- connect the USB cord to the scanner and the CPU
- start the xsane program (KDE menu)
Problems
- Make sure the scanner is supported by sane
- Make sure the lock is disengaged (not all scanners have a lock, but the best ones do)
- Let the scanner warm up and try it again
- Unplug the scanner's power and plug it back in and try again
- Check to see if the power supply is good (and the right voltage/amperage)
- It is generally a good idea to have some "known good" power supplies on hand for initial testing.