Difference between revisions of "DVD Burning from the Command Line"

Latest revision as of 12:40, 9 May 2014

This page has been migrated to a document on Free Geek's Google Drive.

Information remaining behind may no longer be relevant.

MIGRATOR:

When you have tagged this page as migrated,
please add a link to the new document on Google Drive.

(Link to new page immediately below.)

[1] See Burning data to multiple disks using Discspan for instructions on how to make suitable iso images.

Use this to burn an iso on a dvd

growisofs -dvd-compat -Z /dev/dvd=disc.iso

and this on a cd

cdrecord -v -pad dev=/dev/cdrw1 Disk1.iso

You can use -speed=1 if you are having difficulty burning a DVD.

@@ Line 1: / Line 1: @@
-Use this to make an iso or use [[Burning_data_to_multiple_discs_using_Discspan | discspan ]].
+{{Migrated}}
+[https://docs.google.com/document/d/1wX2rHXWRgTsaUr5VL2uHm2dRxa2VODACBjuRErkxKic/edit?usp=sharing]
-<code>genisoimage -o cd.iso -R -J  cd_dir</code>
+See [[Burning_data_to_multiple_discs_using_Discspan | Burning data to multiple disks  using Discspan ]] for instructions on how to make suitable iso images.
 Use this to burn an iso on a dvd
@@ Line 11: / Line 11: @@
 <code>cdrecord -v -pad dev=/dev/cdrw1 Disk1.iso</code>
-TSBackup has two DVD burner installed Substitute <code>/dev/dvd1</code> for <code>/dev/dvd</code> for the second burner. The first one should be showing up as /dev/dvd but udev might have overwritten it on reboot in which case it is /dev/cdrom (hopefully not).
 You can use <code>-speed=1</code> if you are having difficulty burning a DVD.
 [[Category:Tech support]]