Difference between revisions of "Wireless Card Testing"
Jump to navigation
Jump to search
(added new and improved PCI wireless card testing) |
m (switched the keep if and recycle if) |
||
Line 12: | Line 12: | ||
|- | |- | ||
| Determine Card Status || | | Determine Card Status || | ||
− | |||
− | |||
− | |||
− | |||
Keep IF: | Keep IF: | ||
#you can connect to the Free Geek Wireless Network and surf the web. | #you can connect to the Free Geek Wireless Network and surf the web. | ||
Line 23: | Line 19: | ||
#Click the side link “By Manufacturer” and search for the wireless card's chip set. | #Click the side link “By Manufacturer” and search for the wireless card's chip set. | ||
*Keep in mind that this list is not comprehensive and may not include the card you are looking for. If that's the case, test it anyway. | *Keep in mind that this list is not comprehensive and may not include the card you are looking for. If that's the case, test it anyway. | ||
+ | Recycle into the yellow bin IF: | ||
+ | #the card's lights do not come on | ||
+ | #AND the card does not show up in lspci or sudo lshw when you type these commands into a terminal | ||
+ | *If both conditions are true, your done with testing, go to the next card and start again. | ||
|- | |- | ||
| Label || Initial and stick a Tested By Sticker on the Keeper Card. If the wireless card is not compatible with Linux, write that on a sticker or piece of tape, attach to the card with a Powers On Untested Sticker. | | Label || Initial and stick a Tested By Sticker on the Keeper Card. If the wireless card is not compatible with Linux, write that on a sticker or piece of tape, attach to the card with a Powers On Untested Sticker. |
Revision as of 13:46, 24 November 2010
These are instructions for testing Wireless PCI Cards for desktop computers. PCI cards are not hot swappable, so make sure the computer is off before starting the testing process. If you have any questions, check in with your instructor.
|