Difference between revisions of "Getting the Processor Information"
Jump to navigation
Jump to search
(→GREEN Chart: Switched "Disconnect HD" and "Add Ram..." boxes per Walter's suggestion) |
|||
| Line 73: | Line 73: | ||
blowncaps -> good_mobo [taillabel="YES", taillabel_es="SÍ"] | blowncaps -> good_mobo [taillabel="YES", taillabel_es="SÍ"] | ||
| − | blowncaps -> | + | blowncaps -> disconnect [taillabel="NO"] |
good_mobo -> pull_mobo [taillabel="YES", taillabel_es="SÍ"] | good_mobo -> pull_mobo [taillabel="YES", taillabel_es="SÍ"] | ||
| Line 80: | Line 80: | ||
pull_mobo -> not_done | pull_mobo -> not_done | ||
| − | + | disconnect -> addstuff | |
| − | + | addstuff -> checktight -> plugin -> poweron | |
Revision as of 17:20, 15 November 2011
GREEN Chart
Checking the Cables and Connections
- Is the power strip on?
- Is the computer plugged into the power strip?
- Is the power switch on the back of the power supply on?
- Is the power supply plugged into the motherboard?
- Some motherboards have a 4 pin connector (as well as the 20 or 24 pin connector). Make sure that this is also plugged in properly.
- Is the power switch connected to the motherboard?
Alternative method for determining the processor information
This is your last resort option. Do not do this unless the instructions told you to.
- Is the computer marked with the model number or speed?
- Use this information. (You may need to google the model number.)
- If (and only if) that does not work:
- Check with an instructor
- See if you can see the speed without removing anything
- Remove the heat sink/fan only if necessary
- You may need a magnifying glass. (See instructor.)
English Version: Getting_the_Processor_Information
Vercion Español: Getting_the_Processor_Information_en_Español